Inclusion
An internal characteristic inside a diamond — a crystal, fracture, cloud, or other feature formed during growth. Inclusions determine a diamond's clarity grade and, in large concentrations, can affect its face-up appearance.
Almost every diamond contains inclusions. They form as the diamond crystal grows under extreme heat and pressure over millions of years — other minerals get trapped inside, small fractures form, or growth irregularities occur. The entire GIA clarity scale — from Flawless to I2 — describes how many inclusions are present, how large they are, where they sit, and how visible they are under 10× magnification.
The diamond inclusion scale runs: FL (Flawless) → IF → VVS1 → VVS2 → VS1 → VS2 → SI1 → SI2 → I1 → I2 → I3. Each step down the scale means inclusions are larger, more numerous, or more centrally placed. The key practical question for buyers is whether a specific inclusion will be visible to the naked eye in the face-up position under normal lighting. For round brilliants, VS2 and above is reliably "eye-clean" for virtually all observers. SI1 is usually eye-clean in rounds; less reliably in step cuts like the emerald cut or Asscher. SI2 requires individual stone evaluation — viewing a 360° stone video is strongly recommended before purchasing SI2 or below.
Inclusions affect price significantly. A one-carat G·VS1 round typically costs 20–35% more than a G·SI1. Understanding inclusion types helps buyers make informed decisions about where on the clarity scale to buy for their priorities. The best value clarity grade for most buyers is VS2 or SI1 — eye-clean in nearly all cases at a meaningful discount to VVS grades. For more on how the 4Cs interact with price, see our 4Cs priority guide and the SI1 vs VS2 buying guide.
- MAGNIFICATION
- 10× loupe
- EYE-CLEAN FLOOR
- ~VS2 (reliably)
- MAJOR TYPES
- 8 common types
COMMON INCLUSION TYPES
A mineral crystal trapped inside the diamond during growth. Can be colourless (diamond crystal), black (graphite), red/orange (garnet), or green. Large crystals can affect transparency; small ones are common and benign.
A small fracture inside the stone. In most cases feathers are small and stable — a VS2 feather is not a structural risk. Large feathers extending to the surface can theoretically be vulnerable to chipping if in a vulnerable position, though this is rare in well-set stones.
A group of very small pinpoints clustered together. In low concentrations, clouds are harmless. Dense clouds in SI2/I1 stones can cause a milky or hazy appearance — one of the most optically disruptive inclusion types at higher concentrations.
A long, thin crystal — often rod-shaped. Usually colourless and not visible to the naked eye. Common in VVS–VS clarity stones where they appear as faint lines under magnification.
A single very small crystal, usually white or black. Visible only under 10× magnification. Multiple pinpoints together form a cloud. Near ubiquitous in diamonds below FL grade.
A series of pinpoints, clouds, or crystals arranged along a twinning plane — a structural irregularity that occurred during growth. Common in cushion and round brilliants. At VS clarity and above, generally not visible to the naked eye.
A crystal that reaches the surface of the stone. Can appear as a slight bump on a facet surface. Affects both clarity and polish/symmetry grade. Relatively rare.
A hollow opening on the surface of a diamond, sometimes caused by a crystal popping out during polishing. Can trap dirt. Affects surface integrity and polish grade.
Questions about inclusions
At what clarity grade do inclusions become visible to the naked eye?
As a rule, inclusions in VS2 and above are essentially invisible to the naked eye under normal viewing conditions (no magnification, normal lighting, face-up view). SI1 is borderline — most SI1 inclusions are not visible face-up, but some types (e.g. a central crystal or twinning wisp near the table) can be. SI2 inclusions are more frequently eye-visible, particularly in step cuts (emerald, asscher) where the open, clear facets make inclusions easier to spot. I1 inclusions are usually visible to the naked eye. For round brilliants specifically, the many facets scatter light and hide inclusions better than step cuts — an SI1 round is generally a safe eye-clean choice. See our clarity guide for the full scale.
What types of inclusions affect a diamond's durability?
Most inclusions do not affect a diamond's structural integrity in normal wear. The main exceptions are large feathers (fractures) that extend to the surface or girdle, particularly near a vulnerable position (thin girdle, prong placement area). Even these are rarely a practical problem in well-made settings. Knots (crystals reaching the surface) can be vulnerable to chipping in high-impact positions. GIA grading reports include a plot showing inclusion locations — a jeweller can advise whether a specific inclusion's position is a concern for a particular setting style.
What is the difference between an inclusion and a blemish?
Inclusions are internal characteristics — features inside the diamond formed during growth or cutting. Blemishes are external — surface features such as scratches, polish lines, abrasions on facet edges, or naturals (unpolished sections of the original rough's surface left intentionally). Both affect the clarity grade. See our blemish glossary entry for detail on external characteristics.
How does GIA determine clarity grade from inclusions?
GIA graders evaluate inclusions and blemishes under 10× magnification, assessing five factors: size (how large the feature is relative to the diamond), number (how many are present), position (central vs peripheral), nature (type — a feather is more significant than a pinpoint), and relief (how visible the feature is — colour contrast against the diamond background). The worst single characteristic determines the floor of the grade; the combination of all characteristics determines the final grade within the scale from FL (Flawless) to I2 (Included).
Is "eye-clean" a GIA grade?
No. "Eye-clean" is informal trade language, not an official GIA designation. It generally means no inclusions or blemishes are visible to a naked, unaided eye at approximately 25 cm in face-up orientation under normal lighting. Different observers have different eyesight — some SI2 stones are eye-clean to most people while others are not. Our recommendation: use the clarity grade as a starting filter, then evaluate individual stones at SI1 and below by reviewing the inclusion plot and (ideally) a high-quality video from retailers like James Allen or Blue Nile.