Table
The large flat facet on top of the diamond — the main window into the stone. Table percentage (table width ÷ girdle diameter) is one of eight parameters GIA uses to determine the cut grade for round brilliants.
The table of a diamond is the single largest facet on any polished diamond. In a standard round brilliant, it is an octagonal flat surface at the very top of the crown. Its size relative to the girdle diameter is expressed as diamond table percentage — the most commonly quoted cut proportion after pavilion depth.
Table percentage has an inverse relationship with fire: smaller tables allow more light to refract through the surrounding crown facets, producing spectral colours (fire), while larger tables allow more direct light return (brightness). GIA's Excellent grade targets the 54–57% range, which the Institute determined produces the optimal balance of brightness, fire, and scintillation across a large sample of observer ratings.
The table percentage also appears as a key reference in the diamond depth and table guide — because depth and table interact: a large table (60%+) typically accompanies a shallower crown, reducing total depth. For buyers, the overall GIA cut grade is a better single indicator than table % alone. See the full analysis in our depth and table guide.
- GIA EX RANGE
- 54–57%
- FACET SHAPE
- Octagon (round)
TABLE PERCENTAGE RANGES — ROUND BRILLIANT
Questions about the table
What is the ideal table percentage for a round brilliant?
GIA's Excellent cut grade for round brilliants targets a table percentage of roughly 54–57% of average girdle diameter. Too large a table (above 62%) produces a "spread" stone that sacrifices fire for face-up size — light enters and exits without enough internal reflection. Too small a table (below 52%) traps light inside the stone and reduces brightness. The cut grade integrates table with pavilion depth, crown angle, and six other parameters — no single proportion defines cut quality alone.
How is table percentage measured?
Table percentage = table width ÷ average girdle diameter × 100. On a GIA report, both the table width and girdle diameter are measured by automated optical scanning to within fractions of a millimetre. The value is reported as a whole number percentage on the grading report alongside the proportion diagram.
Does a larger table make a diamond look bigger?
Not necessarily. A larger table increases face-up spread (the visible footprint from above) relative to carat weight, but at the cost of fire (spectral dispersion). Buyers who prioritise face-up size sometimes deliberately choose larger-table stones in the 58–62% range to maximise the appearance of size per dollar. However, these stones typically carry a small cut grade discount and display less rainbow fire than an ideal-table stone. The practical difference is subtle — a 58% table GIA Excellent stone still looks beautiful.
Is the table the same as the crown?
No. The table is a single flat facet — the largest on the stone. The crown is the entire upper portion of the diamond above the girdle, which includes the table plus the surrounding crown facets (bezel facets, star facets, and upper girdle facets). Crown angle and table percentage are related but separately measured. A stone with a large table will typically have shallower crown angles, since there is less crown height available for the surrounding facets.
What table percentage do fancy shapes use?
Fancy shapes (emerald, princess, oval, cushion, asscher) do not use the same GIA cut-grade system as round brilliants, and there is no single ideal table % for non-round shapes. Emerald cut stones typically show larger tables (60–68%) as a stylistic feature of the step-cut design, emphasising clarity and colour. Asscher cuts are similar. Cushion cuts vary widely. For fancy shapes, look at overall face-up appearance rather than a specific table target.