Guides · Diamond Shapes

Asscher Cut Diamond Buying Guide 2026

The Asscher cut is a square step cut with aggressively clipped corners and a deep pavilion that creates one of the most distinctive optical effects in diamond cutting: the hall-of-mirrors. Its open facets demand higher clarity and colour grades than brilliant cuts.

The Asscher cut's defining characteristics

The Asscher cut was created by Joseph Asscher in 1902 and became iconic in the Art Deco period (1920s–30s). Its octagonal outline (square with heavily clipped corners), high crown, and step-cut parallel facets produce the concentric-square hall-of-mirrors reflection pattern — very different from the fragmented scintillation of brilliant cuts. The Asscher is the architectural, contemplative alternative to the busy sparkle of rounds and cushions.

The Asscher is a niche choice: it accounts for roughly 1–2% of diamond engagement ring sales in 2026, far behind the emerald cut (5–8%) and other shapes. This makes it a distinctive choice with a dedicated following among buyers who appreciate its Art Deco heritage and step-cut optics. Asscher cuts trade at 20–30% below equivalent round brilliants.

Clarity: the most critical specification

The Asscher's large, flat step facets act as mirrors — they reflect the interior of the stone clearly rather than fragmenting light as brilliant facets do. This transparency means inclusions visible at 10× magnification are often also visible to the naked eye face-up. The clarity bar is higher for Asscher cuts than for any other shape except the emerald cut (which has similarly open facets).

Recommended clarity: VS2 minimum for eye-clean appearance; VS1 for peace of mind. SI1 is possible only if the specific stone's inclusion location (near the girdle, not at the table) allows for eye-cleanliness — this must be confirmed via 360° video. Always verify SI1 and below step cuts via video at James Allen. See our clarity guide for the full evaluation process.

Proportions

ParameterTarget RangeNotes
L:W ratio1.00–1.05Square is the Asscher's defining shape; above 1.08 looks rectangular
Depth %60–68%Asschers are typically deeper than brilliants; avoid 70%+ (hidden weight)
Table %60–68%Smaller table than emerald cut; part of the Asscher design
PolishGIA Very Good or ExcellentCritical for step cut mirror quality
SymmetryGIA Very Good or ExcellentOff-centre table is visible in step cuts

GIA does not assign a cut grade to Asscher cuts — evaluate all proportions from the report. Verify at GIA Report Check. Depth and table matter for the hall-of-mirrors effect: the deep pavilion is what creates the receding square reflections.

Settings for Asscher cuts

The Asscher's octagonal outline suits minimal settings that do not compete with the stone's distinctive geometry. A four-prong solitaire with thin prongs at the four corners is the most common choice. Bezel settings look very architectural with Asscher cuts — the metal rim echoes the geometric outline. Art Deco-inspired settings (milgrain, filigree, geometric motifs) are a natural complement to the Asscher's 1920s heritage.

Halos can look busy with Asscher cuts — the step cut's clean geometry and the halo's sparkle are aesthetically mismatched for many buyers. If a halo is desired, a square or octagonal halo (rather than round) is more cohesive. See our setting guide for the full range. Also see our vintage diamond guide for Art Deco context.

Frequently Asked Questions

Why does the Asscher cut require a higher clarity grade than a round brilliant?

The Asscher cut is a step cut with large, flat facets that act like mirrors — they do not fragment light like a brilliant cut, so inclusions have nowhere to hide. Even small inclusions near the centre are clearly visible through the open facets in face-up viewing. VS2 is the recommended minimum clarity for an eye-clean Asscher; VS1 provides more peace of mind. SI1 is too risky for most Asscher cuts without direct video confirmation of inclusion location. See our diamond clarity guide for full evaluation guidance.

What is the hall-of-mirrors effect in an Asscher cut?

The hall-of-mirrors is the characteristic optical pattern of the Asscher cut — the large flat facets reflect each other in an infinite regression of concentric square reflections, creating a mesmerising, architectural pattern distinct from the scintillation of brilliant cuts. It is most visible in face-up viewing under diffused light. This effect is what makes the Asscher cut unique and is the primary reason buyers choose it. The depth and precision of the step facets determine how well-developed the hall-of-mirrors pattern is in a specific stone.

Is an Asscher cut the same as a square emerald cut?

They are related but distinct. Both are octagonal step cuts with clipped corners and parallel step facets. The Asscher has more aggressively clipped corners (wider clipping, more pronounced octagonal outline), a higher crown, and a deeper pavilion specifically designed to produce the hall-of-mirrors pattern. A square emerald cut has narrower corner clipping, more rectangular in appearance at the corners, and slightly different proportions. The Royal Asscher name is trademarked by the Royal Asscher Diamond Company for their specific proportioned cut with enhanced facet count. See our Asscher cut glossary entry.

What colour grade should I choose for an Asscher cut in white metal?

G or better is the standard recommendation for Asscher cuts in platinum or white gold. Step cuts are more colour-transparent than brilliant cuts — the large open facets allow body colour to show more clearly than in rounds. For truly colourless face-up appearance in white metal: F or better. H in white metal may show very faint warmth face-up for colour-sensitive buyers. In yellow gold, I–J is acceptable. Benchmark colour grade prices at CaratAtlas (CC BY 4.0).