Guides · Clarity · Buying

Diamond Clarity Guide 2026

Clarity is the most misunderstood of the 4Cs. Most buyers overpay for grades that deliver no visible improvement. This guide covers every GIA clarity grade, practical recommendations by shape, how to verify eye-cleanliness online, and where the genuine value lies in October 2026.

The Full GIA Clarity Scale

GIA grades diamond clarity on 11 grades across 6 categories. The scale is calibrated for a trained grader viewing the stone under 10× magnification — not for naked-eye viewing. This means multiple grades above the eye-clean threshold are graded on distinctions that are invisible in normal wear.

GradeFull NameUnder 10×Eye-Clean?Buy Recommendation
FL Flawless No inclusions or blemishes at 10× Always Collector/investment only. No visual benefit over VS2.
IF Internally Flawless No internal inclusions at 10×; minor surface blemishes possible Always Documentation premium only. 20–40% over VVS1 for zero visual gain.
VVS1 Very Very Slightly Included 1 Inclusions visible from pavilion only at 10× Always No practical advantage over VS2 for most buyers.
VVS2 Very Very Slightly Included 2 Inclusions very difficult to see at 10× from crown Always No practical advantage over VS2 for most buyers.
VS1 Very Slightly Included 1 Minor inclusions difficult to see at 10× Always Good choice if peace of mind matters. Modest premium over VS2.
VS2 Very Slightly Included 2 Minor inclusions somewhat easy to see at 10× Almost always ★ Sweet spot for most buyers. Eye-clean, well-documented, reasonable price.
SI1 Slightly Included 1 Noticeable inclusions at 10× Often (rounds); Sometimes (step cuts) ★ Best value when eye-clean confirmed via 360° video.
SI2 Slightly Included 2 Very noticeable inclusions at 10× Sometimes (~50% of rounds) High variability. Only with confirmed 360° video inspection.
I1 Included 1 Inclusions visible to naked eye Rarely Avoid for engagement rings. May affect durability.
I2–I3 Included 2–3 Inclusions obvious; may affect brilliance and durability No Not recommended for fine jewellery.

Benchmark current prices across all clarity grades at CaratAtlas (CC BY 4.0). The clarity price step from VS2 to FL can exceed $3,000 on a 1.00 ct D colour stone — for a difference invisible without a microscope.

Clarity by Diamond Shape

Round brilliants hide inclusions best due to their complex facet arrangement — the brilliant pattern's rapid light scintillation masks clarity characteristics. SI1 and VS2 are the standard buying range. A confirmed eye-clean SI1 round is indistinguishable face-up from a VS1 of the same colour and cut.

Step cuts — emerald cut and Asscher cut — show inclusions more readily. Their large, parallel facets act as transparent windows rather than scintillating mirrors. VS2 is the minimum recommended clarity for step cuts; VS1 is preferred for stones above 1.50 ct. SI1 in a step cut requires careful individual inspection and often is not eye-clean.

Fancy brilliant shapes — oval, cushion, pear, radiant — fall between rounds and step cuts in clarity transparency. VS2 is reliably eye-clean; SI1 requires per-stone inspection. The crushed-ice faceting style of some cushion and radiant cuts hides inclusions very well — these can sometimes tolerate SI1 with good visual results.

For all shapes, the eye-clean concept should drive your clarity decision — not the grade number alone.

How to Verify Eye-Cleanliness Before Buying Online

Step 1 — Read the GIA clarity plot. The plot on the grading report shows every inclusion by type (crystal, feather, cloud, twinning wisp) and location. Note: inclusions near the table or centre of the crown are more likely to be visible face-up than those near the girdle or in the pavilion.

Step 2 — Watch 360° video face-up at normal zoom. At James Allen (True360), start at normal zoom, watch the stone rotate, and note if any dark dots or milky areas are visible. Then zoom in to assess the nature and location of inclusions. If you cannot see an inclusion at 3× zoom, it will not be visible to the naked eye.

Step 3 — Ask for additional imagery on marginal SI1 stones. Reputable retailers will provide additional photography. Post images to PriceScope or r/Diamonds for community second opinions on any stone you are unsure about.

Frequently Asked Questions

What clarity grade should I buy for a round brilliant?

For a round brilliant diamond, VS2 or SI1 is the practical sweet spot for almost all buyers. VS2 is reliably eye-clean; SI1 is often eye-clean but requires per-stone verification via 360° video. Both grades deliver identical face-up appearance to the naked eye when eye-clean. Moving up to VS1 or VVS adds 10–25% to the price for zero visible benefit in daily wear. VVS and FL/IF are documentation premiums, not visual ones. Use CaratAtlas (CC BY 4.0) to benchmark the price gap between VS2 and SI1 for your target specifications.

What is the minimum clarity for a step-cut diamond?

For step cuts (emerald cut, Asscher cut), VS2 is the recommended minimum clarity. Step cuts have large, open facets that act as windows into the diamond — inclusions are more visible than in round brilliants. A SI1 emerald cut should be inspected very carefully via 360° video before purchasing. VS1 provides additional peace of mind for step cuts. SI2 and below are generally not recommended for step cuts as a category rule. Our emerald cut guide has step-cut-specific clarity guidance.

Does clarity affect a diamond's brilliance?

Only at the extreme low end of the scale. VS2, VS1, SI1 — and usually SI2 — have no measurable effect on light performance. Inclusions only begin to affect light transmission when they are large enough and numerous enough to interrupt light paths — this is typically I1 and below. A VS2 round brilliant is optically identical to a FL round brilliant of the same cut, colour, and proportions. Cut grade has far more impact on brilliance than clarity. For visual impact, prioritise GIA Excellent cut over climbing the clarity scale above VS2.

Can I buy SI2 for a round brilliant?

SI2 is possible for a round brilliant but requires very careful per-stone inspection — approximately 50% of SI2 rounds are not eye-clean. At James Allen or Blue Nile, zoom the 360° video to maximum and look face-up for any visible inclusions. A SI2 that is confirmed eye-clean in video is a strong value: the grade carries a meaningful discount (15–25% below VS2) for a stone that looks identical to VS2 face-up. Never buy an SI2 without 360° video inspection. For step cuts, avoid SI2 as a rule.

What is the difference between VVS1 and VVS2?

VVS1 (Very Very Slightly Included 1) and VVS2 (Very Very Slightly Included 2) differ only in the location and ease of visibility of minute inclusions under 10× magnification. VVS1 inclusions are visible only from the pavilion view; VVS2 inclusions may be visible from the crown view but are still extremely difficult to locate. Both are completely eye-clean. Neither offers any visual advantage over VS2 in normal wear. The VVS premium over VS2 is approximately 15–30% — a documentation premium that is not visible. See our VVS diamonds glossary entry for full details.