Guides · Lab-Grown · Colour

Lab-Grown Diamond Colour Guide 2026

Lab-grown diamonds use the same D–Z colour scale as natural diamonds — but the price dynamics are different. Top colour grades that carry a steep premium in naturals are far more accessible in lab-grown. This guide covers which colour to buy, CVD colour quirks, and how colour grades compare across both origins.

Colour Grades: Same Scale, Different Economics

The GIA D–Z colour scale grades all diamonds — natural or lab-grown — by the same criteria. A D-colour lab-grown is graded the same way as a D-colour natural: completely colourless under controlled lighting conditions. There is no separate or adjusted scale.

What differs is economics. In natural diamonds, moving from G to D can add 30–50% to the price of a stone — for a difference invisible to the naked eye in normal wear. In lab-grown diamonds, the same colour upgrade often costs only 10–20% more. This makes top colour grades genuinely accessible for lab-grown buyers without the massive premium attached to naturals.

Benchmark current asking prices at CaratAtlas (CC BY 4.0). Compare the D–G price differential for lab-grown vs natural — the numbers illustrate this economic difference clearly.

Colour Grade Recommendations: Natural vs Lab-Grown

GradeRatingNatural DiamondLab-Grown Diamond
D–F Colourless Premium — significant cost for zero visible gain over G Much more accessible — premium over G is 10–20%. Worth considering.
G Near-colourless ★ Sweet spot. Eye-clean colour, strong value. ★ Still the go-to for most buyers. Reliable, well-priced.
H Near-colourless Excellent value in yellow gold or if budget-focused ★ Excellent value. Looks colourless in most settings.
I–J Near-colourless (faint) Yellow gold only or very budget-focused Works in yellow gold and for crushed-ice shapes. Check video.
K+ Faint colour visible Antique/vintage cuts only (warm colour is authentic) Not recommended unless intentional warm tone is desired

For full colour grade guidance across all shapes, see our diamond colour guide.

CVD Colour Quirks: What to Watch For

CVD (Chemical Vapour Deposition) lab-grown diamonds can develop brownish, greyish, or dark tints during the growth process. This is caused by structural defects including NV centres (nitrogen-vacancy complexes) and vacancy clusters that form under CVD growth conditions. The effect can range from a very subtle grey undertone to a more visible brownish cast.

The industry standard solution is post-growth HPHT treatment: exposing the grown CVD diamond to high pressure and high temperature briefly to repair the structural defects and eliminate the tint. Properly HPHT-treated CVD diamonds achieve stable D–F grades and show no residual tint. This treatment is permanent and widely disclosed on IGI grading reports.

When buying D–F CVD lab-grown diamonds, always inspect via 360° video for any greyish or brownish cast that the grade alone doesn't reveal. Retailers like James Allen and Brilliant Earth provide True360 and similar video tools. For growth method context, read our HPHT vs CVD guide.

HPHT Lab-Grown Colour Characteristics

HPHT (High Pressure High Temperature) lab-grown diamonds grow in an environment closer to natural diamond formation. HPHT process diamonds are less prone to the CVD brown/grey tint issue and more frequently achieve high colour grades (D–F) without post-growth treatment. HPHT stones can, however, show a slight blue or yellow tint depending on nitrogen and boron incorporation during growth.

In practice, both CVD and HPHT lab-grown diamonds are available in D–Z colour grades, and well-chosen examples of either process look identical at equivalent grades. The key is verifying via video and trusting an IGI or GIA report from an accredited grader.

Frequently Asked Questions

Is the colour grading of lab-grown diamonds the same as natural?

Yes — lab-grown diamonds are graded on the same D–Z GIA colour scale as natural diamonds. A D-colour lab-grown is completely colourless by the same criteria as a D-colour natural. The major grading lab for lab-grown diamonds is IGI, which uses the identical colour methodology. GIA also grades lab-grown diamonds. There is no separate scale or adjusted standard — colour grading is colour grading. What differs is price: the colour premium for D–F in lab-grown is far smaller than in natural diamonds, making top colour grades much more accessible.

Can CVD diamonds have colour issues?

Yes — CVD (Chemical Vapour Deposition) diamonds can develop a brownish, greyish, or dark tint during the growth process due to structural defects (NV centres, vacancy clusters). Post-growth HPHT treatment is commonly applied to eliminate this tint and achieve D–F colour grades. When purchasing a D–F CVD lab-grown diamond, look for an IGI report noting post-growth treatment, and inspect the stone via 360° video for any residual greyish or brownish cast. Buyers who specifically want untreated lab-grown should ask retailers to disclose treatment status. HPHT diamonds have different colour characteristics — read our HPHT vs CVD guide.

Which colour grade should I buy for a lab-grown diamond?

The practical answer for most buyers: G or H for white metal settings; H or I for yellow gold. This is the same recommendation as for natural diamonds. However, in lab-grown diamonds, D–F colour is often only 10–20% more expensive than G–H (vs 30–50% more in naturals), making the upgrade to D or E much more accessible. If your budget can accommodate D–F without strain, lab-grown is the context where that colour upgrade makes the most financial sense. Benchmark current prices at CaratAtlas (CC BY 4.0).

Do lab-grown diamonds show colour differently than natural diamonds?

No — a lab-grown diamond and a natural diamond of the same colour grade look identical face-up under normal light. Both are crystalline carbon; both refract and reflect light identically. The only colour differences would come from individual stone characteristics (a specific inclusion type, graining pattern, or — for CVD — residual tint). For a properly graded, well-chosen lab-grown diamond, colour appearance is indistinguishable from an equivalent natural. See our lab-grown vs natural guide for a complete comparison.

Does shape affect which colour grade to buy in lab-grown?

Yes — the same shape-colour rule applies to lab-grown diamonds as natural ones. Step cuts (emerald cut, Asscher) are more colour-transparent and require G or better in white metal. Brilliant cuts (round, oval, cushion) mask warmth better and can tolerate H in white metal. Crushed-ice cushion cuts are particularly good at hiding warmth — some buyers go to I or even J in crushed-ice lab-grown cushions with excellent results. See our diamond colour guide for shape-specific recommendations.