Diamond Culet Explained: Why It Matters and What to Look For on a GIA Report
The culet is the bottom point of a diamond — or, in antique cuts, a flat facet at the base. Modern rounds should have a None or Very Small culet. Here is why it matters and what the GIA report tells you.
KEY TAKEAWAYS
What is the culet and why does it matter?
The culet is the bottommost facet (or point) of a diamond — the very tip of the pavilion. In a modern round brilliant, the ideal culet is "None" — meaning the pavilion facets come to a sharp point with no additional flat facet at the base. When a culet is present (even a small one), it creates a tiny octagonal flat surface at the bottom of the pavilion.
Why does this matter? When you look straight down through the table of a diamond with a culet, the flat bottom facet acts as a window — you see through it to whatever is below (typically the setting or your finger), creating the appearance of a dark circle or spot in the centre of the diamond face-up. The larger the culet, the more visible this dark circle. A large or very large culet in a modern diamond is a notable visual defect that reduces optical performance and face-up beauty. Always check the culet grade on the GIA report before purchasing.
GIA culet grades: None to Very Large
GIA grades culet size on the following scale: None → Very Small → Small → Medium → Slightly Large → Large → Very Large → Extremely Large. For modern round brilliants, the recommended grades are None or Very Small — these produce the sharp point that is standard in contemporary cutting and do not create visible dark circles face-up.
Small culets are generally acceptable and still produce very minor effects visible only under magnification. Medium and above begin to show a visible dark circle face-up in larger stones, particularly at 1.00 ct and above. Large and Very Large culets are characteristic of antique cuts (old European and old mine cuts) rather than modern rounds — in a modern diamond, they represent a cutting quality issue worth avoiding. Browse GIA report data including culet grades on specific stones at James Allen and Blue Nile.
The culet in antique diamonds
In antique cuts — old European cuts and old mine cuts — the large, open culet is intentional and part of the cut's aesthetic identity. When looking face-down through the table of an old European cut, the open culet creates the characteristic concentric circle optical pattern — sometimes called the "bulls-eye" effect. This is considered beautiful and authentic by antique diamond collectors, not a defect.
If you are buying a modern round brilliant and the GIA report lists a Medium or larger culet, this is worth investigating — it may affect face-up appearance. If you are buying an antique cut, the large culet is expected and appropriate. Specialist antique dealers at events like the Las Vegas Antique Jewellery & Watch Show and at 1stDibs can guide you through antique cut evaluation. Community discussion of antique cut aesthetics is active at PriceScope's antique forum.
Frequently asked questions
- What culet should I look for in a modern diamond?
- None or Very Small. These grades are standard in modern well-cut round brilliants and do not create any visible dark circle face-up. Small is also acceptable. Medium and above should be assessed on video before purchase — the larger the culet, the more visible the dark circle effect. Verify culet grade on any stone at GIA Report Check.
- Does culet size affect the GIA cut grade?
- Yes — culet is one of the factors GIA considers in its overall cut grade for round brilliants. A Very Large or Extremely Large culet cannot achieve GIA Excellent cut. None through Small culets are within the range compatible with Excellent grades (combined with all other proportion factors). A Medium culet may still achieve Very Good. Check both the cut grade and the specific culet grade on the GIA report at GIA Report Check.
- Can I see the culet in a diamond photo?
- In most professional diamond photography, the culet is not visible as a dark circle unless the stone is shot directly face-up with a backlight. In 360° video at James Allen, you can often see the culet effect when the camera passes overhead — a dark dot at the centre of the table. Very Small and Small culets are typically invisible in 360° video; Medium and above may be detectable. None culets are completely invisible.
- Is a culet the same as an inclusion?
- No — the culet is a deliberately cut facet (or intentional point) at the base of the diamond, not an inclusion. Inclusions are internal or external flaws. The culet is a cutting proportion decision. However, a very large culet can look like an inclusion face-up (as a dark circle), which is why smaller is better for modern cuts. See our inclusion glossary entry for the distinction.
TERMS IN THIS NOTE