Guides · Proportions · Cut

Diamond Depth & Table Percentage Guide 2026

Depth% and table% are the two most important proportion numbers on a GIA grading report for assessing cut quality and face-up size. This guide explains what they mean, gives ideal ranges for every major shape, and shows how to use them when comparing diamonds.

What Depth% and Table% Measure

Depth% is the ratio of a diamond's total height to its average diameter. A depth% of 61.5% means the stone is 61.5% as tall as it is wide. The practical implication: a high depth% means more carat weight is buried in the base of the stone rather than spread across the face-up surface. A 1.00 ct diamond with 64% depth looks noticeably smaller face-up than a 1.00 ct diamond with 60% depth.

Table% is the ratio of the flat top facet (the table facet) to the average diameter. The table is the flat octagonal surface visible on top of any round brilliant. A large table makes more of the crown surface flat — reducing crown height and the fire-producing angles of the crown facets. A small table creates a tall crown but can look dark. Both extremes reduce visual performance.

These numbers are found in the "Proportions" section of every GIA grading report. Verify report numbers at GIA Report Check.

Ideal Ranges by Shape

ShapeDepth%Table%Notes
Round Brilliant 59.0–62.5% 54–58% GIA grades cut. Prioritise GIA Excellent cut grade over individual numbers.
Princess Cut 65–70% 65–72% Deeper than rounds by nature. High depth% contributes to princess's carat weight but smaller face-up size.
Oval Cut 58–65% 52–62% Lower depth% gives more face-up spread. Check for bow-tie effect separately.
Cushion Cut 61–67% 61–69% Range is wide. Crushed-ice cushions often have higher depth. Verify via video.
Radiant Cut 61–67% 61–69% Similar to cushion. Avoid depth above 70%.
Marquise Cut 58–64% 53–63% Check L:W ratio and bow-tie independently.
Pear Shape 56–65% 53–63% Lower depth% gives the elongated spread. Verify via video.
Emerald Cut 60–67% 60–70% Step cut. Depth% affects carat weight distribution differently from brilliants.
Asscher Cut 60–68% 60–68% Step cut. Similar to emerald. Symmetry matters more than exact depth%.

These are practical buyer guidelines, not rigid rules. For fancy shapes without GIA cut grades, 360° video always takes priority over numbers alone. A diamond with proportions outside these ranges can still look beautiful in video; one within these ranges can look poor if other factors (pavilion angle, crown angle, symmetry) are off. See our diamond cut grade guide for full context.

Depth Percentage and Face-Up Size

The face-up size of a diamond — how large it appears when viewed from above as it would be worn in a ring — is directly affected by depth%. A "deep" diamond (high depth%) has more of its weight distributed in the height rather than the spread. This is sometimes called "leakage" — the carat weight is there, but it doesn't show in the face-up appearance.

When comparing two 1.00 ct round brilliants, check the millimetre diameter on the GIA report. A 1.00 ct round with 61% depth might measure 6.50 mm across; a 1.00 ct round with 63.5% depth might measure only 6.35 mm across. That 0.15 mm difference is visible in the ring setting. See our diamond size chart to understand how millimetres translate to visible face-up size.

Common Buying Mistakes

Buying deep stones for apparent value. Deeply cut diamonds sometimes appear to be very good value because they offer a higher carat weight for a given price. They are not — the extra carat weight is hidden in the base. Always compare millimetre diameters and face-up surface area, not just carat weight.

Ignoring depth% for fancy shapes. Buyers focus on L:W ratio and forget depth. A pear shape with 68% depth will look dark and small face-up. Check depth% for every fancy shape purchase and compare millimetre dimensions to understand face-up size. Use our size chart to visualise dimensions.

Over-focusing on numbers vs video. Proportion ranges are filters, not guarantees. Always verify visual performance via 360° video at James Allen or Blue Nile after checking that proportions fall within acceptable ranges.

How to Calculate Depth Percentage and Why It Matters

Understanding how to calculate depth percentage is straightforward: divide the diamond's total height (in millimetres) by its average girdle diameter, then multiply by 100. For example, a round diamond measuring 6.50 mm in diameter and 4.00 mm in depth has a diamond depth percentage of 61.5% (4.00 ÷ 6.50 × 100). This number appears on every GIA and IGI grading report in the proportions section. The ideal diamond depth for a round brilliant diamond depth percentage is 59.0–62.5%, which represents the optimal balance between light return and face-up spread. For the round brilliant diamond table percentage, aim for 54–58% — this range maximises the interplay between table brightness and crown fire.

Fancy shape depth and table targets differ substantially from rounds. For oval diamond depth and table percentage, target depth 58–65% and table 52–62% — lower depth percentages give ovals their characteristic spread advantage over rounds. Cushion diamond depth and table percentage ranges are wider (depth 61–67%, table 61–69%) because cushion cuts come in both square and elongated variants with different optimal proportions. Princess diamond depth and table percentage targets are deeper than other shapes at 65–70% depth and 65–72% table — the princess cut's brilliant-style faceting works efficiently even at higher depth percentages. For emerald diamond depth and table percentage and cut proportions, the step-cut structure changes the rules: depth 60–67% and table 60–70% are appropriate, with symmetry mattering more than exact depth in step cuts. The Rapaport price lists factor cut quality implicitly through supply and demand for well-proportioned stones.

For elongated shapes, the proportions affect visual balance as well as light performance. Pear diamond depth and table percentage guidelines suggest depth 56–65% and table 53–63% — lower depth maximises the elongated spread that makes pears appear larger per carat. Marquise diamond depth and table percentage targets are similar (depth 58–64%, table 53–63%) because both shapes share the elongated brilliant-cut structure. Radiant diamond depth and table percentage and cut proportions follow cushion guidelines closely (depth 61–67%, table 61–69%) since radiants are essentially cushions with trimmed corners. In every case, the proportions table above provides a practical starting filter — but 360° video should always be the final arbiter of light performance. The Natural Diamond Council provides educational resources on how proportions affect a diamond's visual beauty.

Frequently Asked Questions

What is depth percentage in a diamond?

Depth percentage (depth%) is the ratio of a diamond's total height to its average diameter, expressed as a percentage. It is calculated as: total depth ÷ average diameter × 100. Depth% appears on all GIA grading reports in the proportions section. For a round brilliant, a depth% of 61.5% means the stone is 61.5% as tall as it is wide. Depth% directly affects how much carat weight is "hidden" in the depth versus contributing to face-up surface area. A high-depth stone looks smaller than its carat weight; a well-proportioned stone shows maximum face-up size. See our depth percentage glossary entry.

What is table percentage in a diamond?

Table percentage (table%) is the ratio of the flat top facet (the table) to the average diameter of the stone, expressed as a percentage. A larger table increases the visible flat surface area but reduces the crown height — affecting how much fire and scintillation the stone produces. A table that is too large creates a "fish-eye" effect where the pavilion reflects as a ring through the table. A table that is too small creates a dark, deep crown that dulls the stone. For round brilliants, 54–58% is ideal. The table% is listed on all GIA grading reports.

What are the ideal depth and table percentages for a round brilliant?

For a GIA Excellent-cut round brilliant, target: Depth 59.0–62.5%, Table 54–58%, Crown Angle 33–35°, Pavilion Angle 40.6–41.0°. These ranges are based on the Tolkowsky ideal proportions and optimise light return, fire, and scintillation. The GIA Excellent grade encompasses a broader range than the strictest "Super Ideal" parameters — buyers seeking the very best light performance can target: Depth 59.5–62.0%, Table 54–57%. See our diamond cut grade guide for full cut analysis.

How do depth and table affect face-up size?

Depth% directly affects how large a diamond looks face-up relative to its carat weight. A stone with 65% depth has more of its weight hidden in depth — it will look smaller face-up than a stone with 60% depth of the same carat weight. High-depth stones are sometimes called "deep stones" or "steep stones" — they appear to be undersized for their carat weight. When comparing two diamonds of the same carat weight, check the average diameter in millimetres (on the GIA report). A larger diameter at the same carat weight means less depth — a bigger-looking stone for the same money. See our carat weight guide for face-up size tables.

Do depth and table matter for fancy shapes?

Yes — depth% and table% are significant for fancy shapes, but ideal ranges differ from rounds. GIA does not issue a cut grade for fancy shapes, so buyers must evaluate proportions from the report manually. For oval cuts: Depth 58–65%, Table 52–62% is a solid starting range. For cushion cuts: Depth 61–67%, Table 61–69%. For marquise cuts: Depth 58–64%, Table 53–63%. Very high depth% in any fancy shape creates a dark, heavy-looking stone. As with rounds, prioritise 360° video to assess actual light performance beyond what proportions alone can predict. See our diamond shapes guide.

How do I calculate depth percentage from a GIA report?

Depth percentage is calculated as: total depth (mm) ÷ average girdle diameter (mm) × 100. On a GIA report, this number is already calculated and listed in the "Proportions" section as "Depth %". For round diamonds, the average diameter is the mean of the minimum and maximum girdle diameter. For fancy shapes, the average of length and width is used. You do not need to calculate it yourself — the GIA report provides it directly. However, understanding the formula helps you interpret what the number means: a 61.5% depth means the diamond is 61.5% as tall as it is wide.

What happens if a diamond has too much depth percentage?

A diamond with excessive depth percentage (e.g., above 63% for a round, above 68% for a cushion) hides carat weight in its base rather than spreading it across the face-up surface. The result is a stone that looks smaller than its carat weight suggests — sometimes called a "deep stone" or "nail head" in the trade. You are paying for weight that does not contribute to visual size. Always compare the millimetre diameter of two stones at the same carat weight: a significant diameter difference indicates one is deeper than the other. Use our diamond size chart to verify expected diameters at each weight. The IGI also documents proportions on its grading reports.

What is the ideal table percentage for different diamond shapes?

Ideal table percentages vary by shape. For round brilliants: 54–58% (the tightest range). For ovals: 52–62%. For cushions and radiants: 61–69%. For princess cuts: 65–72%. For emerald and asscher (step cuts): 60–70%. For pear and marquise: 53–63%. A table that is too large reduces crown height and fire; too small creates a dark, heavy appearance. These ranges serve as starting filters — always verify visual performance via 360° video. Proportion data is listed on every grading report from GIA and IGI.