Glossary · Diamond Shapes

Princess Cut

Square modified brilliant · pointed corners · deep pavilion

The princess cut was the dominant alternative to round brilliant for two decades. Today it trades at 15–22% below equivalent rounds — partly from declining trend demand, partly from its structural corner-chip vulnerability. Understanding both the appeal and the risks is essential before buying.

What Is a Princess Cut Diamond?

Developed in the 1960s and refined into its modern form in the 1980s, the princess cut diamond is defined by four pointed corners and a square or near-square outline. Its facet structure — a modified brilliant arrangement with typically 49–58 facets — produces strong sparkle with a distinctly geometric character: square-shaped light flashes rather than the circular brilliance of rounds.

The princess cut's inverted pyramid profile (deepest at the culet, widest at the table) is deliberately designed to retain rough weight. An octahedral diamond crystal can yield two princess cuts with minimal waste — a major efficiency advantage over round cutting, where 40–50% of rough is discarded. This explains why princess cuts were heavily promoted by manufacturers in the 1990s–2000s: they were more profitable to cut. Today they are benchmarked at CaratAtlas and traded at significant discounts to rounds. Browse live princess inventory at James Allen and Blue Nile.

The princess cut is often confused with the Asscher cut — both are square, but the Asscher is a step cut with cropped corners and a very different light return pattern. The princess is a brilliant cut; the Asscher is a step cut. Similarly, the cushion cut is often compared to the princess: both are square brilliants, but the cushion has rounded corners (reducing chipping risk) while the princess has sharp, vulnerable 90° corners.

Corner Chips: The Main Risk

The four pointed corners of a princess cut are the thinnest, most structurally weak points of the stone. A sharp impact at a corner — against a hard surface, a door frame, another ring — can chip or fracture the diamond. Unlike inclusions (which are usually stable), a chip at a corner is an acute mechanical failure that worsens over time if not protected.

Mitigation is straightforward: always set a princess cut in a four-prong or V-prong mounting that covers each corner. Never set a princess in a bezel or east-west tension setting that leaves corners exposed. This is not aesthetic preference — it is functional protection. Most experienced jewellers and GIA-trained gemologists consider corner-protective settings non-negotiable for princess cuts. Read insurance and care advice from retailers like Whiteflash before purchasing.

Princess Cut Pricing in 2026

Princess cuts trade at approximately 15–22% below equivalent round brilliants for matched carat, colour, and clarity. This discount reflects both declining trend demand and the structural liquidity disadvantage: fewer buyers are actively seeking princess cuts, which reduces the price sellers can achieve.

For value-oriented buyers who genuinely prefer the square aesthetic, this discount represents real savings — you can buy a larger princess for the price of a smaller round. The key question is resale: if you ever need to sell, princess cuts are harder to move than rounds. Read the full shape discount analysis in our shape price discounts article and the recent princess cut news guide. Track current benchmarks at CaratAtlas.

Princess Diamond Size Chart & Buying Guide

A princess diamond size chart is helpful because the square outline creates a different carat-to-mm relationship than round stones. A 1.00 ct princess typically measures approximately 5.5 x 5.5 mm compared to a 6.5 mm round of the same weight. Use our princess diamond carat to mm chart for the full conversion table. Understanding princess cut meaning in the context of diamond shapes is simple: it refers specifically to the square modified brilliant with pointed corners, not any square diamond cut.

A thorough princess diamond buying guide should emphasise princess diamond depth/table percentage targets: aim for 64–74% depth and 67–74% table for the best balance of brilliance and apparent size. Because GIA does not grade princess cut proportions, buyers must verify these numbers on the grading report at gia.edu. In a round vs princess diamond comparison, rounds cost 15–22% more but offer GIA cut grading, deeper resale liquidity, and no corner-chip risk. IGI-certified princess cuts are also widely available in lab-grown inventory. Industry data from Rapaport shows consistent discounting of princess shapes relative to rounds, and the Natural Diamonds Council provides further context on natural princess diamond market trends.

Frequently Asked Questions

What makes a princess cut different from a round brilliant?

The princess cut has a square outline with four pointed corners, versus the round brilliant's circular profile. Its facet arrangement — typically 49–58 facets arranged in a modified brilliant pattern — produces strong sparkle but with a different character than rounds: more geometric, with square-shaped flashes rather than the round brilliant's circular scintillation. Princess cuts have no GIA cut grade (GIA grades cut only for rounds), requiring buyers to evaluate proportions manually. Benchmark princess prices versus rounds at CaratAtlas using shape factor adjustments.

Why are princess cuts cheaper than round brilliants?

Three reasons: (1) Rough yield: Princess cuts are designed to preserve rough weight — an inverted pyramid shape fits neatly into octahedral rough, wasting less material than round cutting. This means manufacturers pay less per carat of finished stone but also sell them cheaper. (2) Market liquidity: Princess cuts have a shallower buyer pool than rounds, so sellers must price lower to find buyers. (3) Trend decline: Princess cuts peaked in popularity in the 2000s–2010s and have been declining in bridal market share since 2018 as ovals, cushions, and emerald cuts have grown. Current discount to round is approximately 15–22% for equivalent carat, colour, and clarity. See our shape price discounts article.

What are the corner chip risks with princess cuts?

Princess cuts have four sharp, pointed corners — the thinnest and most structurally vulnerable points of any diamond. A hard knock at a corner angle can chip or fracture the stone. Chips at corners are very difficult or impossible to re-cut out without significant weight loss. The risk is mitigated by setting the diamond in a four-prong setting that covers each corner (called a "V-prong" or "claw" setting) rather than leaving corners exposed in a bezel or tension setting. This is not optional on princess cuts — always use corner-protective settings. Ring setting advice at Brilliant Earth and Whiteflash.

What proportions should I look for in a princess cut?

Since GIA does not grade cut for princess cuts, use these guidelines (from PriceScope and community consensus): Table: 67–74%; Depth: 64–74%; Length-to-width ratio: 1.00–1.05 for square, 1.06–1.15 for slightly rectangular. Polish and symmetry: GIA Excellent or Very Good. Check the full proportion data on every GIA report at gia.edu/report-check. Always view a 360° video before buying — princess cuts vary significantly in their actual light performance despite similar on-paper specs.

Does colour show more in a princess cut than a round?

Yes — princess cuts tend to retain and concentrate body colour in the corners, making colour more visible than in equivalent rounds. For princess cuts in white metal (platinum or white gold), a colour of G or higher is generally recommended. H may show slight warmth at the corners in direct lighting. In yellow gold settings, J–K can look intentionally warm and attractive. The practical implication: budget slightly more for colour in a princess than you would for a round, or accept a warmer appearance at equivalent price. Verify current princess pricing at CaratAtlas.